POTENTIALUL BIOTEHNOLOGIC LA PRODUCEREA VINURILOR ECOLOGICE ROZE IN MOLDOVA
Abstract
The regim of technological modes of jus “must” extraction from moldavian red sorts of grape in order to get pink color wine was studied. There have been elaborated new grapes selection for the preparation of dry pink wines, a range of important conditions for the batch, as wel as detected the technological schemes of processing the red grape sorts. Recommendations have been proposed related to the grape varieties used as wine raw materials in Moldova. It also enables to perform the main operation at the initial stages of wine making, crushed grapes maceration, in the regime, chosen according to the nomogram, that dependes on the contents of phenol complexes in the raw materials and the extraction temperature. The characteristic color features of the pink wines on the base of optic density in a 5-mm pot with light penetration 420, 520 and 620 nm (for Glories), was detected. The technology of selective thermo-processing, as well as, the production technology of specific wine coloring with dose up in fermentation vase of antocyanic extract were tested. The production of pink wines is in a growing also in the R.of Moldova, but the variable climate and less expensive technological schemes are applied because of variable climate and quality of raw materials. The new proposed technology provides the selective steam action at skin zone of whole grapes, where there are conglomerations of pigments and as a result the extraction – pressure is accelerated and the contamination of wine juice with wild micro flora is reduced at minimum. Through researches there has been identified the thermal regime of ten minutes at selective warming of skin with 62 %, the flesh representing only 47 oC, with 50 % extraction selection of antocyates, creating premises for energy consumption decrease. The new proposed installation VPG-50M has the goal of grape reception – thermal shock – condensation separation – pressure with – wine juice leaking – discharge, which give the possibility of simplificating of traditional line with four technical units.The papers published in the journal are licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits unrestricted, non-commercial use, distribution and reproduction in any medium, provided the work is properly cited.
Open Access Journal: The journal allow the author(s) to retain publishing rights without restrictions. Authors are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).